Solid FENIX NTM® Worktops Cut to Size
Fully customise your Solid FENIX NTM® Worktops with our comprehensive, high-quality Bespoke Cutting Service, so your surfaces arrive ready to fit. When using our worktop cutting service, our highly skilled team uses specialist machinery to achieve precise cuts, tailoring and finishing worktops to the highest standard.
Watch our full video to find out more.
Fully customise your Solid FENIX NTM® Worktops with our comprehensive, high-quality Bespoke Cutting Service, so your surfaces arrive ready to fit. When using our worktop cutting service, our highly skilled team uses specialist machinery to achieve precise cuts, tailoring and finishing worktops to the highest standard
Watch our full video to find out more.
Design your worktop online
- Design, price-up and order your bespoke worktops online at a time that suits you with our easy-to-use Online Bespoke Worktop Tool.
- Save 10% on all bespoke services when you order online!
You can also place your bespoke order via email. For a quote please email
Please Note: The 10% discount only applies to orders placed via our Online Bespoke Worktop Tool and excludes any other medium such as email or telephone. No discount code is required as the prices for bespoke services are already discounted on the Online Bespoke Worktop Tool.
Struggling with our bespoke online tool? Get help and advice from our fabrication expertsBespoke tool help
We can professionally cut Solid FENIX NTM® worktops to the correct width and/or length.
By only using equipment of the highest quality, we can guarantee an accurate and perpendicular cut. Our machinery is regularly serviced to maintain absolute precision.
Overmounted Sink Cut-out
Once provided with the correct measurements, we are able to accurately cut an aperture for an overmount sink.
It is recommended that overmount sinks are placed 150mm from joins in work surfaces and 40mm from the front edge of a worktop to ensure stability.
Please note: to prevent splitting, corners will need a minimum radius of 8mm
Undermounted Sink Cut-out
Undermounted sinks are available in a variety of shapes and sizes.
Once provided with the correct measurements, we are able to cut an accurate space to accommodate a sink of any dimensions.
We offer an edge polishing service for our Solid FENIX NTM® worktops to remove any marks that may have been left through other bespoke worktop services. 2mm is skimmed from the edge and it is then polished to provide a neat finish and ensure your worktop is ready for installation.
Edge polishing is recommended where worktop edges will be visible once installed. Not all edges are polished as standard, and whilst all edges will be smooth, some may show marks from the manufacturing process.
A radius corner is an excellent option for Solid FENIX NTM® worktops that will sit on curved kitchen cabinets and are a fantastic way to achieve a softer finish. We are able to cut corners to any radius provided.
A biscuit joint is the best method for joining two Solid FENIX NTM® worktops.
This style of biscuit joint has pockets machined into the edge of the worktops to be connected, which will need to be filled with standard size 20 biscuits.
This technique provides a secure join and wastes less material compared to a traditional 90° biscuit joint. A clear 2-part epoxy resin can be used to fix the biscuits in place, securely fasten the surface together and also work as a waterproof sealant.
Please note: 10mm will be lost from the 'female' side of the work surface on biscuit joints and will need to be added to your measurements for the connecting 'male' end to ensure your worktop is the correct length.
Drainage grooves are the perfect finishing touch for your Solid FENIX NTM® worktop and are recommended for worktops being fitted with an undermount sink.
Our drainage grooves are applied in sets of four and are tapered to allow for natural drainage.
Standard drainer groove length is 450mm, although we can accommodate longer or shorter lengths if required.
Every kitchen is different, which is why we offer an irregular cut-out option.
Our irregular cut-outs are suitable to accommodate a variety of kitchen items, including extractor fans, electrical sockets and architectural features such as extruding beams.
Using our expert knowledge and state-of-the-art machinery, we are able to provide cut-outs for hobs of any size.
To protect the structure of the worktop, we recommend leaving a minimum of 100mm between the hob aperture and the edge of the surface.
Tap Hole Cut-out
We can provide a tap hole cut-out for any specified measurement.
The diameter for a standard tap hole is 35mm but there are a number of different sizes available so please be sure to check the measurements for your specific tap.
A tapered cut goes diagonally across the work surface.
Tapered cuts are an excellent solution for uneven walls and look striking when used to create a feature as part of a breakfast bar or kitchen island.
We can provide ellipse ends of any radius for your Solid FENIX NTM® worktop. Ellipse ends are a stylish, elegant option for any home and look fantastic in contemporary settings.
A fantastic option for a breakfast bar, kitchen island or simply for the freestanding end of the worktop over a run of cabinets.
Stainless steel hotrods are a stylish way to protect your Solid FENIX NTM® worktops from heat damage.
Our fabrication team will router apertures in a choice of formations: either in a 'diamond' or 'linear' shape, ready for the installation of a stainless steel hotrod set (supplied).
The hotrods do not need to be fixed into position which can allow for easy cleaning - though you can fix the hotrods in place with a sealant or adhesive if preferred.
Alternatively if you would like a bespoke hotrod formation, please contact us for a quote.
Your worktops arrive fully customised and ready to fit, saving you time and money on installation.
Your bespoke worktops are delivered into your home in just 6-10 working days.
Our easy-to-use Online Bespoke Worktop Tool makes designing, pricing-up and ordering your bespoke worktops simple.