Shopping CartCheckout
Earthstone Worktops

Laminate Kitchen Worktops Cut to Size

Use our bespoke online worktop tool to quickly and easily design your new laminate surfaces, allowing you to calculate the cost and order bespoke laminate worktops via our website. Find out more about the bespoke worktop tool or start designing your surfaces below:

10% OFF Bespoke Services

Online bespoke worktop tool

Our easy-to-use Online Bespoke Worktop Tool allows you to choose your worktop and add your alterations to it, providing a price for your laminate worktop customisation alongside a technical drawing showing how it will look when it is finished. Any fabrication services required can receive 10% off when ordering through this tool, offering a fantastic saving!

Please note: that all Online Bespoke Worktop Tool prices given on this page are inclusive of the ongoing10% discount for all services ordered online - find out more on our Current Offers page.

Alternatively, if you would like a quotation, get in touch or email us:

Lead Times

When we receive an order for a bespoke laminate worktop, our fabrication team create a diagram that depicts the exact customisations to be made. We require your confirmation of the diagram before cutting your worktop, to ensure all details are correct. The lead time from diagram confirmation is calculated from:

Fabrication*
2 working days
*The lead times quoted are from time of diagram confirmation.
 
Delivery*
1-3 working days
(England, Scotland & Wales)
*Delivery to the Scottish highlands and islands may take longer.

Bespoke Worktop Cutting Service

Fabrication Service
Prices from
£13.50
£36.00
£18.00
£31.50
£36.00

Cut-to-Size:

Get laminate worktops cut to size with our handy worktop cutting service.

We can professionally cut laminate worktops to size, in both width and length.

By using equipment of only the highest quality, we can guarantee an accurate and perpendicular cut. Our machinery is regularly serviced to maintain the high standards of our worktop cutting service.

Standard
Price
£15.00 (first cut)
+ £10.00 (each additional cut)
Online Bespoke
Tool Price
£13.50 (first cut)
+ £9.00 (each additional cut)

Prices above are for first cut and charged at the discounted rate for multiple cuts.

Worktop Edging Strip Application:

Edging strip is used to finish laminate worktops after apertures have been cut or they have been cut to size.

Worktop edging strips need to be applied to cut edges of laminate surfaces to provide a neat finish and to protect the particle board core. Our edging strip application service takes the hassle out of worktop installation and guarantees a professional finish, leaving you with more time to sit back and enjoy your new surfaces.

Worktops are supplied with two edging strips as standard, one of which will be used when this service is chosen (so there is no need to purchase an additional edging strip). Edging strips can be applied to the width of any of our worktops (up to 900mm).

Standard
Price
£20.00
Online Bespoke
Tool Price
£18.00

Prices above are for up to 1m, additional edging will be charged £5 (£4.50 if ordering via our bespoke tool) per metre.

Overmounted Sink Cut-out:

Our skilled can create an inset sink cut-out in laminate worktops with optimum precision.

Cut-outs for overmounted sinks - also known as 'inset' or 'drop-in' sinks - can be routed to any size. We simply require the sink dimensions in order to create a made-to-measure aperture.

Once your worktop has been delivered, we recommend sealing the exposed edge and the rim of the sink with a clear silicone sealant.

Please note: to prevent splitting, corners will need a minimum radius of 8mm

Standard
Price
£40.00
Online Bespoke
Tool Price
£36.00

Priced per cut-out.

Hob Cut-out:

Our hob cut-outs for kitchen worktops can accommodate models from a wide range of brands.

Cut-outs for built-in hobs can be made to your exact specifications; this allows us to provide hob cutouts for a wide range of brands.

We advise leaving 100mm gap between the end of the worktop and the edge of the cut-out, so that the strength and stability of the work surface is not compromised.

Please note: to prevent splitting, corners will need a minimum radius of 8mm

Standard
Price
£40.00
Online Bespoke
Tool Price
£36.00

Priced per cut-out.

Irregular Cut-out:

Irregular cut-outs can be created to accommodate a number of accessories, fittings and structural features.

Every kitchen has bespoke requirements and irregular cut-outs can be used to accommodate anumber of these.

Suitable for a number of different features, irregular cut-outs may be used for extractor fans, electrical sockets, extruding walls or beams, amongst other things.

Standard
Price
£20.00
Online Bespoke
Tool Price
£18.00

Applies to cuts under 400mm.

Standard
Price
£40.00
Online Bespoke
Tool Price
£36.00

Applies to cuts 400mm and over.

Tapered Cuts:

A tapered cut is a diagonal cut through a worktop.

Tapered cuts are done diagonally across the surface of the worktop.

A fantastic solution for an uneven wall, a tapered cut could also be used to create a striking feature in a kitchen, as part of a breakfast bar or island. These cuts can be done between any two points on a worktop edge.

Standard
Price
£20.00
Online Bespoke
Tool Price
£18.00

Priced per cut-out.

Tap Hole Cut-out:

Have tap holes added to your laminate worktops with our bespoke worktop cutting service.

With our efficient worktop cutting service, we can provide tap hole cut-outs to any size.

A standard tap hole diameter is 35mm, though we ask customers to verify the diameter before we create custom worktop cuts, as there are a number of different sizes on the market.

Once your tap is in situ, we recommend sealing around the base with a clear silicone sealant to prevent water ingress.

Standard
Price
£7.50
Online Bespoke
Tool Price
£6.75

Priced per tap hole.

Mason's Mitre Joint:

Choose a mitre joint to allow you to join two laminate worktops seamlessly.

A mason's mitre joint is the best method for joining two laminate worktops.

This style of mitre joint is also known as a butt and scribe joint or hockey stick joint, as it features a curved cut that resembles the shape of a hockey stick. Three grooves are routed on the underside of each worktop, allowing 'dog bone' worktop connector bolts (supplied) to be fitted.

This technique provides a secure join and wastes less material compared to a traditional 45° mitre joint. We recommend using a worktop sealant between the two worktops when joining to create a water-resistant seal.

Please note: 35mm will be lost from the 'female' side of the work surface on mitre joints and will need to be added to the connecting 'male' end to ensure your worktop is the correct length.

Standard
Price
£50.00
Online Bespoke
Tool Price
£45.00

Please note - the following options are only available for our square edge laminate worktops:

Radius Corners:

A radius corner provides a softer look to a laminate worktop

Curved worktop corners are a stylish option for a contemporary kitchen and we are pleased to be able to offer radius corners, from a minimum of 50mm to a maximum of 300mm and can only be applied to our square edge surfaces. These can be cut to suit the curve of a corner cabinet for a sleek, seamless finish in your kitchen.

The price is inclusive of re-edging, so your worktop will arrive ready for installation. Radius corners on square edge laminate worktops are perfect for creating a softer look, or for those concerned with safety around young children.

Standard
Price
£35.00
Online Bespoke
Tool Price
£31.50

Priced per radius corner. Depending on the radius corner location, the worktop edging may need to be re-applied and this can incur extra charges. We will notify you if additional charges apply.

Radius Ends:

Radius ends provide a rounded finish to laminate worktops, perfect for breakfast bars

Ideal for a breakfast bar or kitchen island, a radius end provides a perfectly rounded end on a length of laminate work surface. The price is inclusive of re-edging, for a smooth, sleek finish.

Radius ends are a stylish option for any contemporary kitchen and are a fantastic way to create something unique for your home.

Standard
Price
£40.00
Online Bespoke
Tool Price
£36.00

Priced per radius end.