Bonded FENIX NTM® Worktops Cut to Size

We can professionally cut bonded FENIX NTM® worktops to the correct width and/or length.

By only using equipment of the highest quality, we can guarantee an accurate and perpendicular cut. Our machinery is regularly serviced to maintain absolute precision.

Edging strips need to be applied to all exposed edges of bonded FENIX NTM® surfaces to provide a neat finish and to protect the core of the worktop. Our edging strip application service guarantees a professional finish and will be required if worktops are cut to size.

A mason's mitre joint is the best method for joining two FENIX NTM® worktops.

This style of mitre joint is also known as a butt and scribe joint or hockey stick joint, as it features a curved cut that resembles the shape of a hockey stick. Three grooves are routed on the underside of each worktop, allowing 'dog bone' worktop connector bolts (supplied) to be fitted.

This technique provides a secure join and wastes less material compared to a traditional 45° mitre joint. Use a worktop sealant between the two worktops when joining to create a water-resistant seal.

Please note: 35mm will be lost from the 'female' side of the work surface on mitre joints and will need to be added into your measurements for the connecting 'male' end to ensure your worktop is the correct length.

Cut-outs for overmount sinks - also known as 'inset' or 'drop-in' sinks - can be routed to any size. We simply require the sink dimensions in order to create a made-to-measure aperture.

Once your worktop has been delivered, we recommend sealing the exposed edges and the rim of the sink with a clear silicone sealant.

Please note: to prevent splitting, corners will need a minimum radius of 8mm

Curved worktop corners are a stylish option for a contemporary kitchen and we are pleased to be able to offer radius corners, from a minimum of 50mm to a maximum of 300mm. These can be cut to suit the curve of a corner cabinet for a sleek, seamless finish in your kitchen.

The price is inclusive of re-edging, so your worktop will arrive ready for installation. Radius corners on square edge bonded FENIX NTM® worktops are perfect for creating a softer look.

Priced per radius corner. Depending on the radius corner location, the worktop edging may need to be re-applied and this can incur extra charges. We will notify you if additional charges apply.

Every kitchen has bespoke requirements and irregular cut-outs can be used to accommodate a number of these.

Suitable for a number of different features, irregular cut-outs may be used for extractor fans, electrical sockets, extruding walls or beams, amongst other things.

Cut-outs for built-in hobs can be made to your exact specifications; this allows us to provide hob cut-outs for a wide range of brands.

We advise leaving a 100mm gap between the end of the worktop and the edge of the cut-out, so that the strength and stability of the work surface is not compromised.

Please note: to prevent splitting, corners will need a minimum radius of 8mm

We can provide a tap hole cut-out for any specified measurement.

The diameter for a standard tap hole is 35mm but there are a number of different sizes available so please be sure to check the measurements for your specific tap.

Ideal for a breakfast bar or kitchen island, a radius end provides a perfectly rounded end on a length of bonded FENIX NTM® work surface. The price is inclusive of re-edging, for a smooth, sleek finish.

Radius ends are a stylish option for any contemporary kitchen and are a fantastic way to create something unique for your home.

Tapered cuts are done diagonally across the surface of the worktop.

A fantastic solution for an uneven wall, a tapered cut could also be used to create a striking feature in a kitchen, as part of a breakfast bar or island. These cuts can be done between any two points on a worktop edge.