Please ask us about our range of FSC certified worktops
Radius corners are an elegant finishing touch for wooden worktops, and are most commonly coupled with kitchen islands and curved cabinetry.
In addition to cutting worktops to common radii measurements, our specialist CNC machine can also cut bespoke radius corners to your specific requirements, creating a worktop that is perfectly tailored to your home.
For extra guidance, we suggest reading our helpful 'How to Measure Radius Corners' information guide before placing your order. If you require any assistance taking these measurements, please don't hesitate to contact us.
Zebrano worktop with a 40mm radius corner, under-mounted sink cut out, pencil edge profile and butt join.
Beech worktop with 200mm radius corner.
Caramel bamboo worktop with 100mm radius corner.
Oak end grain butchers block with radius corners and irregular cut out on the underside of the block.
Oak worktop with irregular cut outs, hob cut out, two 320mm internal radius corners and butt join cut outs.
Walnut worktop with undermounted sink, hob cut out and 200mm radius corner.
Oak worktop with a 200mm radius corner, 920mm ellipse end and irregular cutout.
Iroko worktop with radius corner.
An L-shaped piece of oak with an irregular cut-out, overmounted corner sink and a smooth radius corner.
Iroko worktop with 200mm radius corner.
Beech worktop with 260mm radius corner.
Prime Oak worktop with 85mm radius corner and pencil top edge profile.
Beech worktop with 85mm radius corner.
Beech worktop with large 450mm radius corner and pencil top edge profile.
Black American walnut worktop with hob cut out and 300mm radius corners.
Bespoke 1.2m wide oak worktop with large radius corner.
Beech worktop with irregular cut out, 80mm radius corner and pencil top edge profile.
Prime Oak worktop with 260mm radius corner.
Maple worktop with large 450mm radius corner and pencil top edge profile.
Black American walnut worktop with 50mm radius corner.
Prime Beech worktop with radius corner.
Oak worktop with radius corners, pencil edge profile and irregular cut out.
Iroko worktop with 85mm radius corners.
Iroko worktop with a 420mm radius corner, undermounted sink cut out and tap hole cut out.
Beech worktop with 85mm radius corner.
Walnut worktop with 85mm radius corner.
Beech worktop with 85mm radius corner and irregular cut out.
Walnut worktop with undermounted sink cut out, drainer grooves and 200mm radius corner.
Maple worktop with large 450mm radius corner and pencil top edge profile.
Oak worktop with one 320mm and two 40mm radius corners, two 40mm internal radius corners, Belfast sink cut out and drainer grooves.
Iroko worktop with end cap, 120mm radius corner and irregular cutout.
Cherry worktop with 260mm radius corner.
Cherry worktop with 260mm radius corner.
Black American walnut worktops with 260mm radius corners.
60mm thick walnut worktop with 230mm radius corners.
Maple worktop with 85mm radius corner.
Zebrano worktop with 260mm radius corner.
Prime Beech worktop with two radius corners.
Maple worktop with 85mm radius corner.
Beech worktop with 200mm radius corner.
Maple worktop with 85mm radius corner.
Bespoke 80mm thick full stave black American walnut worktop with radius corners and pencil edge profile.
Maple worktop with large 450mm radius corner and pencil top edge profile.
Deluxe Prime Oak worktop with radius corner and pencil top edge profile.
This maple worktop features a soft edge along the front and an extension to create a beakfast bar with smooth radius corners.
A smaller piece of caramel bamboo, featuring an irregular cut-out with small internal radius.
Cherry worktop with radius corner.
A black american walnut featuring a tap hole and undermounted sink cut-out with smooth radius corners and an internal profile edge.
Deluxe Black American Walnut worktop with undermounted sink cut out and matching drainage grooves, radius corners and a protective end cap.
Black American walnut worktop with three soft radius corners and a hob cut-out.
A full stave iroko worktop featuring smooth radius corners, a soft profile edge, and a cut-out to cater especially for an undermounted sink.
Cherry worktop with 260mm radius corner.
Full stave oak worktop with 90mm end caps and radius corners.
A customised black oak worktop with a smooth radius corner and a bespoke lozenge-shaped sink cut-out.
Full stave iroko worktop with two 180mm radius corners.
Cherry worktop with 260mm radius corner.
Deluxe Walnut worktop with undermounted sink cut out, four 360mm radius corners, tap holes and additional hole cut out.
Caramel bamboo worktop with 100mm radius corner.
Full stave oak worktop with irregular cut out, four 180mm radius corners and one 85mm radius corner.
Bamboo worktop with 150mm radius corner.
Deluxe Oak 1000mm wide worktop with irregular cut out, 180mm radius corner and butt joins.
This Bamboo worktop features an undermounted sink cut out, tap hole and small radius corner on the top left.
Deluxe Prime Oak 960mm wide worktop with four 90mm radius corners and pencil top and bottom edge profile.
Black American walnut worktop with 200mm radius corners.
A specially made breakfast bar surface complete with smooth radius corner, pencil edge profile and worktop connector bolt recesses.
Full stave oak worktop with end cap, 180mm radius corner and ogee edge profile.
Deluxe Oak worktop with four 200mm radius corners.
Full stave oak worktop with 20mm radius corners.
Oak worktop with 40mm end cap, ogee edge profile, one 25mm radius corner and irregular cut out.
Full stave iroko worktop with a 360mm radius corner, an internal radius corner and irregular cut outs.
A Full Stave Prime Oak worktop created especially for a kitchen island, with smooth radius corners and a circular cut-out for an end-grain butchers block.
A miniature kitchen island featuring four radius corners made from full stave wenge - our most luxurious timber.
