WEX Solid Oak Wireless Worktop Charger
Solid Oak Worktop Wireless Charger
The solid oak WEX Wireless Worktop Charger is ideal for use in a kitchen, office or on a bedside table, and are compatible with a constantly increasing selection of devices that use the Qi wireless charging standard.
Each housing comes pre-oiled and is made from 100% solid European oak staves, constructed in a vertical arrangement that exposes the extremely hard-wearing end grain of the timber.
Measures 160mm x 40mm. Includes a 12V mains adaptor with UK plug.
The following list of devices are known to be work with this wireless charger. If your device is not listed below, check with the manufacturer to find out if it is compatible with the Qi wireless charging standard. Some smartphones including Apple iPhones and older Samsung Galaxy models may be compatible if used with a wireless charging case or special replacement battery.
Samsung Galaxy S7, Samsung Galaxy S8, Samsung Galaxy S8+, Samsung Note 5, Samsung Note 7, Samsung S6, Samsung S6 Edge, Samsung S6 Edge+, Samsung S7 Edge, Asus Padfone S, Blackberry Classic, Blackberry Z30, CAT Catphone S50, Google Nexus 4, Google Nexus 5, Google Nexus 6, Google Nexus 7, HTC 8X, HTC Droid DNA, HTC Thunderbold, Kyocera Hydro Elite, Kyocera Torque, Kyocera Torque G02, Kyocera Urbano L01, Kyocera Urbano L03, LG G3, LG G4, LG G6, LG Optimus G Pro, Lumia 950, Lumia 950 Dual Sim, Lumia 950XL, M.T.T Master, M.T.T Master 4G, Motorola Droid Max, Motorola Droid Mini, Motorola Droid Turbo, Nokia Lumia 1520, Nokia Lumia 735, Nokia Lumia 830, Nokia Lumia 920, Nokia Lumia 928, Nokia Lumia 930, Saygus V Squared, Sony Xperia Z3V, Sony Xperia Z4V, Techdy Basic Bear, Vertu Signature Touch, Yotaphone 2
Motorola Moto 360, Moto 360 (2015 models).
If you would like to install our WEX Wireless Worktop Charger to an existing wooden worktop or other piece of wooden furnishing, we recommend using a router to cut an 80mm wide circular recess into the worktop 2.5mm less than the thickness of the worktop (37.5mm or 24.5mm depending on the thickness of the worktop you have chosen).
Because of the precision required, we recommend that you make a test recess into a scrap piece of the same type of timber if possible.
Once you have cut the hole, insert the wireless charger into the hole with the charging coils facing upwards. Tighten the two small screws near the edge of the charger in order to ensure that it stays firmly in the recess. Also make sure the charger is pushed fully into the recess so that there is no gap between the top of the charger and the worktop.
If you are ordering a worktop from us, we recommend you take advantage of our bespoke worktop service. We can pre-cut the recess with incredibly precise CNC machinery for just £20, and can also brand a mark onto the top surface of the worktop to give you an indication as to where your device should be positioned in order to charge.
All required fields are marked with a star (*). Click the 'Add To Cart' button at the bottom of this form to proceed.