Full Stave Maple Worktop Upstand 2.5M X 100 X 20mm
Solid full stave maple upstands are made from the same high-quality wide European maple staves that are used to manufacture our full stave maple worktops, making them an ideal alternative to tiling down to the surface of your worktops.
These full stave maple worktop upstands assist in blending worktops into the kitchen's overall design, whilst also hiding the required small 5mm expansion gap between the worktop and wall. Without this gap, the worktop may bow or crack over time if it cannot expand and contract.
Full stave maple kitchen upstands are recommended when installing wooden worktops against uneven walls, as they will help conceal any small gaps that may otherwise be visible.
Our full stave maple upstands are supplied with square edges and can therefore be fitted immediately to create an attractive, chunky look; alternatively they can have a profile applied along the top edge to fit in with your kitchen's design.
Find out more about the importance of quality upstands by reading our dedicated information guide.
Please note: this item should not be fitted directly behind a hob without additional protection. Please refer to the hob manufacturer's guidelines to ensure that your installation complies with safety standards.