Full Stave Ash Worktop Upstand 3M X 100 X 20mm
Our full stave ash upstands are manufactured from the same high-quality 90mm wide staves as our full stave ash worktops and are ideal for giving wooden worktop installations an elegant finish – an efficient alternative to tiling down to the worktop surface.
These upstands allow full stave ash worktops to fit beautifully into a kitchen's design whilst also hiding the small 5mm expansion gap which is required when installing worktops against walls.
Full stave ash upstands are also recommended when fitting worktops against an uneven wall, as they prevent any requirement for the worktops to be cut-to-size by covering any small gaps that would otherwise be visible.
Our full stave upstands are supplied with square edges, and can be fitted immediately to create a chunky look, or have a suitable edge profile routed along the top edge to help them fit in with your kitchen's design.
Find out more about the importance of quality upstands by reading our dedicated information guide.
Please note: this item should not be fitted directly behind a hob without additional protection. Please refer to the hob manufacturer's guidelines to ensure that your installation complies with safety standards.
All required fields are marked with a star (*). Click the 'Add To Cart' button at the bottom of this form to proceed.