How to Order Cut-to-Size Worktops Via the Online Bespoke Worktop Tool: 6 Simple Steps
Ordering worktops that have been cut to size is a quick and easy process when you use our online tool. Simply follow the steps below and you’ll be finished in a flash!
1. Select your wood, press confirm.
2. Select your thickness and size, then press confirm.
3. You are now ready to cut your worktop to size.
First, press the ‘Cut to Size’ button. You need to decide whether you’d like to cut the length (from the left hand side) or the width (from the bottom).
Next, you should choose what size you’d like the resultant worktop to be (what you’ll be left with as opposed to how much you would like to cut off).
4. As a final step, please decide whether you’d like to save the offcut (offcuts can either be sent with the worktop in an unaltered state, or customised further, depending on your preference ).
5. Should you wish to add another worktop to your order, press ‘Add new worktop’ and then repeat the steps above.
Once your order for cut-to-size wooden worktops has been submitted, it will be transmitted to our fabrication team for checking. We will send you a fabrication diagram via email within one working day (or, alternatively, we will contact you to discuss any queries that may have arisen).
Please double-check your fabrication diagram once received and then confirm that it is correct via email. Once your final confirmation has been received by us we will send your order to our fabrication department and production will begin. You can expect delivery within 5-10 working days from point of final diagram confirmation.
For a more detailed overview of the Online Bespoke Worktop Tool, including troubleshooting tips and general information, please consult our full User Guide.
2 Responses to “How to Order Cut-to-Size Worktops Via the Online Bespoke Worktop Tool: 6 Simple Steps”
Leave a Reply
I consent that Direct Online Services LTD may use the personal information I have provided to reply to your comment or enquiry, and that your comment may be published by us, alongside your name, on our website.
If you wish for your comment to be removed, you may withdraw your consent at any time by contacting us. Our privacy policy can be found in the footer below for further information.
Are you able to cut oak tops to match templates provided by the customer?
Hello,
Thank you for your enquiry.
Unfortunately, we do not accept templates however we are able to cut worktops to your requirements for an additional charge. Once the timber has been fabricated we will then sand and treat the timber with Habiol Oil prior to the worktops being quality checked and packaged ready for dispatch. Pre-oiling is mandatory when any other fabrication options are requested. In order to cut the timber, the worktops are removed from their protective packaging, and as such, the wood is exposed to humidity, moisture and changes in the environment. Pre-oiling the timber as soon as the wood has been cut protects and seals the worktop, preventing warping, bowing or splitting in transit, and also means the wood arrives with you ready to install.
The current lead time for a fabrication order is approximately 5-10 working days from confirmation of a diagram to receipt of order. This lead time is estimated by allowing 3-5 days for the cutting and treating of the timber. A further 2-5 working days will then be allocated to ensure the order is dispatched and delivered to the relevant postcode area.
If you would like a quotation for our fabrication service, we will require the following information:
Full Name
Billing Address, including postcode
Delivery Address, including postcode
Contact Telephone Number
The timber you require, the sizes required and your fabrication requirements, including a rough sketch or diagram if possible.
Best Regards,
Leanne @ Worktop Express