On this page you can get a close-up look at many examples of our high quality full stave iroko worktops, including bespoke worktops customised by our fabrication department and more.
If you like the look of our full stave iroko worktops and would like to see the options available, please visit our dedicated full stave iroko worktops page.
More detailed information can be found in our Full Stave Iroko Worktops Nutshell Guide.
Our full stave iroko worktops were chosen as the perfect surface for this pub location as they are both warm in colour and naturally hygienic and water resistant.
Full stave iroko worktops were chosen for this pub in Gloucestershire as they perfectly fit in with the rustic country pub interior.
This full stave iroko worktop was especially fabricated to feature a large radius end that perfectly matches the curve of the cabinets beneath.
A pencil edge profile was added to this full stave iroko worktop to give it a soft feel that cannot be easily dented.
Our full stave iroko worktops are made from a number of 90mm wide staves that run the full length of the worktop and are joined together using specialist glue.
Full stave iroko worktops are an ideal choice for this location as they are naturally hygienic and water resistant, and become even more so if regularly treated with Rustins Danish Oil.
Full Stave iroko as a beautiful breakfast bar and kitchen worktop with radius corners.
Full Stave iroko used to grand effect in this kitchen.
Full stave iroko worktop with under mounted sink cut out, tap hole cut out and irregular cut outs.
Full stave iroko worktop with irregular cut out and end cap.
Full stave iroko worktop with hob cut out and butt join cut outs.
Full stave iroko worktop with belfast sink cut out, pencil top edge profile, drainer grooves and butt join cut outs.
Full stave iroko worktop with two 180mm radius corners.
Full stave iroko worktop with a 360mm radius corner, an internal radius corner and irregular cut outs.
Full stave iroko worktop with undermounted sink, tap holes and drainer grooves cut outs.
Full stave iroko worktop with belfast sink cut out and drainer grooves.
A full stave iroko worktop featuring smooth radius corners, a soft profile edge, and a cut-out to cater especially for an undermounted sink.
Mon 29th May: 10:00 - 14:00